Estimation of irrigation requirements for drip-irrigated maize in a sub-humid climate

Drip-irrigation is increasingly applied in maize (Zea mays L.) production in sub-humid region. It is critical to quantify irrigation requirements during different growth stages under diverse climatic conditions. In this study, the Hybrid-Maize model was calibrated and applied in a sub-humid Heilongjiang Province in Northeast China to estimate irrigation requirements for drip-irrigated maize during different crop physiological development stages and under diverse agro-climatic conditions. Using dimensionless scales, the whole growing season of maize was divided into diverse development stages from planting to maturity. Drip-irrigation dates and irrigation amounts in each irrigation event were simulated and summarized in 30-year simulation from 1981 to 2010. The maize harvest area of Heilongjiang Province was divided into 10 agro-climatic zones based on growing degree days, arid index, and temperature seasonality. The simulated results indicated that seasonal irrigation requirements and water stress during different growth stages were highly related to initial soil water content and distribution of seasonal precipitation. In the experimental site, the average irrigation amounts and times ranged from 48 to 150 mm with initial soil water content decreasing from 100 to 20% of the maximum soil available water. Additionally, the earliest drip-irrigation event might occur during 3- to 8-leaf stage. The water stress could occur at any growth stages of maize, even in wet years with abundant total seasonal rainfall but poor distribution. And over 50% of grain yield loss could be caused by extended water stress during the kernel setting window and grain filling period. It is estimated that more than 94% of the maize harvested area in Heilongjiang Province needs to be irrigated although the yield increase varied (0 to 109%) in diverse agro-climatic zones. Consequently, at least 14% of more maize production could be achieved through drip-irrigation systems in Heilongjiang Province compared to rainfed conditions.     

水流作用下一种养殖金属网衣水阻力特性的数值模拟研究

为保障深远海金属网箱养殖系统的结构安全,进行网箱结构的水动力学研究是一项重要的工作。构成金属网箱主要组成部分的金属网衣是一种小直径多孔的网状结构,在波浪和水流作用下的水动力学特性与一般的海洋工程结构物有显著不同。本文基于有限元基本原理,采用梁单元模拟金属网线结构,采用连接单元模拟网线接触部位的相互作用,并运用ABAQUS软件进行数值计算,在试验验证的基础上,分析了在水流作用下一种金属菱形链网衣在不同网目尺寸、不同网线直径情况下的水阻力变化情况。数值模拟结果表明在各种工况下,当网目尺寸由25 mm增加到35 mm、45 mm时,网衣受力增加幅度的平均值分别为14.71%和38.07%;当网线直径由2.5 mm增加到3.2 mm、4.0 mm时,各工况下网衣受力增加幅度的平均值分别为25.05%和45.06%。研究结果可以为进一步开展深海养殖金属网箱水动力特性研究提供积极的基础。     

脲酶抑制剂与硝化抑制剂对稻田土壤氮素转化的影响

【目的】本研究旨在阐明脲酶抑制剂(urease inhibitor,UI)和硝化抑制剂(nitrification inhibitor,NI)对稻田土壤氮素转化的影响,探讨抑制剂提高稻谷产量以及氮肥利用率的机理。【方法】本试验设在我国南方红壤稻田,共5个处理:1)不施氮肥(CK);2)尿素(U);3)尿素+脲酶抑制剂(U+UI);4)尿素+硝化抑制剂(U+NI);5)尿素+脲酶抑制剂+硝化抑制剂(U+UI+NI);脲酶抑制剂采用N-丁基硫代磷酰三胺(NBPT),硝化抑制剂采用3,4-二甲基吡唑磷酸盐(DMPP)。在水稻分蘖期和孕穗期测定土壤脲酶活性、硝酸还原酶活性、土壤铵态氮含量、硝态氮含量以及微生物碳、氮的含量,分析NBPT与DMPP对水稻两个主要生育期土壤氮素供应的影响,比较各处理的产量以及氮肥利用率,通过逐步回归分析研究以上各指标对产量的影响,探明脲酶抑制剂NBPT与硝化抑制剂DMPP在稻田的增效机理。【结果】1)与单施尿素相比,添加NBPT以及NBPT与DMPP配施均显著提高稻谷产量与地上部氮素回收率,两个处理分别增产6.56%与8.24%,氮素回收率提高幅度为19.4%与23.7%。2)与单施尿素相比,添加NBPT以及NBPT与DMPP配施,显著降低水稻分蘖期的土壤脲酶活性和铵态氮含量,显著提高孕穗期的铵态氮含量,而对此时期的脲酶活性无显著影响,所有处理对两个时期的硝态氮含量、硝酸还原酶活性、微生物量碳、氮含量均无显著影响;因此,NBPT对于抑制脲酶活性以及提高铵态氮含量的作用主要在孕穗期之前,而单施DMPP没有显著效应。3)从各项土壤指标与水稻产量相关性的逐步回归分析结果来看,水稻分蘖期与孕穗期稻田土壤中铵态氮含量对水稻产量影响显著,而且孕穗期的影响大于分蘖期,其余指标则对产量无显著影响。【结论】脲酶抑制剂NBPT以及NBPT与硝化抑制剂DMPP配施显著提高孕穗期土壤中的铵态氮含量,显著提高稻谷产量以及地上部氮素回收率,证明了生产上氮肥后移的重要意义。     

颗粒肥料质量流量传感器设计与试验

变量施肥具有提高肥料利用率、保护生态环境、节约农业生产成本等优点，但目前还没有得到广泛的应用，除了难以获得变量施肥的处方图之外，缺乏闭环检测也是原因之一。闭环控制是实现变量施肥的关键之一，与间接测量排肥轴的转速相比，实时检测肥料的质量流量更为准确。本文基于静电感应原理，设计了一种颗粒肥料质量流量传感器。由于颗粒肥料之间、颗粒肥料与空气、颗粒肥料与排肥管之间的摩擦和碰撞，颗粒肥料会携带一定量的电荷，因此本研究设计了环形电极来检测电荷强度，并利用电流放大电路输出感应电流。通过标定质量流量与感应电流的关系，获得了实时的肥料质量流量。搭建试验台对该颗粒肥料质量流量传感器进行检测，试验台主要包括动态信号采集系统、肥料箱、电流放大器和环形电极传感器。以大颗粒尿素（CO(NH2)2）、过磷酸钙（Ca(H2PO4)2·H2O）和氯化钾（KCl）为研究对象，其平均容重分别为0.7、1.2、1.1g/cm3。根据施肥装置的物理参数，通过调整排肥轴转速可获得近似的目标质量流量，目标质量流量的范围是3~15g/s，增量为1g/s。对于每个质量流量，进行了4次重复。每次重复30s，施肥装置与信号采集系统同时启动。利用平均感应电流和平均质量流量建立回归方程，采用插值法得到实时质量流量。随后，对每种肥料进行25次试验，从而检验本文中颗粒肥料质量流量传感器的测量精度，每次试验的目标质量流量由5个随机质量流量组成，每个质量流量下持续排肥6s，用天平称量30s内的实际质量，通过积分质量流量和时间曲线计算检测质量。采用SPSS 22.0软件对试验结果进行统计分析，分析表明，大颗粒尿素、过磷酸钙、氯化钾的检测误差分别为3.9%、5.1%、5.9%，相应的标准差分别为5.21、7.98、11.29。检测质量与实际质量无显著性差异（P>0.1），大颗粒尿素、过磷酸钙和氯化钾检测误差的数学期望值分别为3.74%、4.93%、5.22%。本文的研究结果表明，检测误差随颗粒肥料粒径的减小而增大。     

幼龄期压砂地枸杞产量和品质多指标耦合灌溉制度优化

为提高宁夏中部干旱带幼龄期压砂地枸杞灌水效率,保障枸杞产量和品质,进行了3水平灌水定额(300、225 m~3·hm~(-2)和150 m~3·hm~(-2))的田间对比试验,采用综合指标增量最优方法对灌溉制度进行了优化。研究发现:枸杞5月上旬萌芽期耗水以土壤蒸发为主,日耗水量0.6～1.2 mm,6月中旬进入夏果花期耗水量增大,日耗水量2.5～3.7 mm,7月中旬枸杞夏果期耗水量继续增大,达2.4～4.3 mm,7月下旬日耗水量最大,为3.2～4.7 mm,8月中旬耗水量下降,日耗水量3.0～4.2 mm。灌水定额对枸杞产量影响显著(P0.05),灌水定额300 m~3·hm~(-2)时产量最高,为1 402.65 kg·hm~(-2);灌水定额225 m~3·hm~(-2)时枸杞多糖、β-胡萝卜素和黄酮较高,含量分别为4.56%、0.15%和0.41%;灌水定额150 m~3·hm~(-2)时枸杞甜菜碱含量较高,为0.77%。进一步通过综合指标增量最优方法进行优化,结果表明β-胡萝卜素含量最高时得到综合指标增量最大,为-5.4%,总耗水量为450 mm。枸杞夏果花期进入需水关键期,阶段耗水量达70 mm以上,进入6月中旬枸杞需水量增大,旬耗水量达29 mm以上。可见,幼龄期压砂地枸杞产量及品质指标均达到最优的耗水量较难获得,但是在β-胡萝卜素含量最高时可以获得产量和品质多指标耦合的最优耗水量,据此进行灌溉制度优化,可以一定程度上实现幼龄期压砂地枸杞优质高产。     

Effects of sediment load on the abrasion of soil aggregate and hydraulic parameters in experimental overland flow

The breakdown of soil aggregates under rainfall and their abrasion in overland flow are important processes in water erosion due to the production of more fine and transportable particles and, the subsequent significant effect on the erosion intensity. Currently, little is known about the effects of sediment load on the soil aggregate abrasion and the relationship of this abrasion with some related hydraulic parameters. Here, the potential effects of sediment load on soil aggregate abrasion and hydraulic parameters in overland flow were investigated through a series of experiments in a 3.8-m-long hydraulic flume at the slope gradients of 8.7 and 26.8%, unit flow discharges from 2×10~(–3) to 6×10~(–3) m~2 s~(-1), and the sediment concentration from 0 to 110 kg m~(–3). All the aggregates from Ultisols developed Quaternary red clay, Central China. The results indicated that discharge had the most significant(P0.01) effect on the aggregates abrasion with the contributions of 58.76 and 60.34%, followed by sediment feed rate, with contributions of 39.66 and 34.12% at the slope gradients of 8.7 and 26.8%, respectively. The abrasion degree of aggregates was found to increase as a power function of the sediment concentration. Meanwhile, the flow depth, friction factor, and shear stress increased as a power function along with the increase of sediment concentration at different slope gradients and discharges. Reynolds number was obviously affected by sediment concentration and it decreased as sediment concentration increased. The ratio of the residual weight to the initial weight of soil aggregates(Wr/Wi) was found to increase as the linear function with an increasing flow depth(P=0.008) or Reynolds number(P=0.002) in the sediment-laden flow. The Wr/Wi values followed a power function decrease with increasing friction factor or shear stress in the sediment-laden flow, indicating that friction factor is the best hydraulic parameter for prediction of soil aggregate abrasion under different sediment load conditions. The information regarding the soil aggregate abrasion under various sediment load conditions can facilitate soil process-based erosion modeling.     

Novel soil quality indicators for the evaluation of agricultural management practices: a biological perspective

Developments in soil biology and in methods to characterize soil organic carbon can potentially deliver novel soil quality indicators that can help identify management practices able to sustain soil productivity and environmental resilience. This work aimed at synthesizing results regarding the suitability of a range of soil biological and biochemical properties as novel soil quality indicators for agricultural management. The soil properties, selected through a published literature review, comprised different labile organic carbon fractions [hydrophilic dissolved organic carbon, dissolved organic carbon, permanganate oxidizable carbon (POXC), hot water extractable carbon and particulate organic matter carbon], soil disease suppressiveness measured using a Pythium-Lepidium bioassay, nematode communities characterized by amplicon sequencing and qPCR, and microbial community level physiological profiling measured with MicroResp^TM. Prior studies tested the sensitivity of each of the novel indicators to tillage and organic matter addition in ten European long-term field experiments (LTEs) and assessed their relationships with pre-existing soil quality indicators of soil functioning. Here, the results of these previous studies are brought together and interpreted relative to each other and to the broader body of literature on soil quality assessment. Reduced tillage increased carbon availability, disease suppressiveness, nematode richness and diversity, the stability and maturity of the food web, and microbial activity and functional diversity. Organic matter addition played a weaker role in enhancing soil quality, possibly due to the range of composition of the organic matter inputs used in the LTEs. POXC was the indicator that discriminated best between soil management practices, followed by nematode indices based on functional characteristics. Structural equation modeling shows that POXC has a central role in nutrient retention/supply, carbon sequestration, biodiversity conservation, erosion control and disease regulation/suppression. The novel indicators proposed here have great potential to improve existing soil quality assessment schemes. Their feasibility of application is discussed and needs for future research are outlined.     

除草剂减量施用对麦田杂草的防治效果及对叶绿素SPAD值的影响

探讨除草剂减施对麦田杂草的防治效果,以及对小麦生长过程中叶绿素SPAD值变化的影响。结果表明,药后45 d,10%苯磺隆WP 9.00 g/hm~2处理(减施60.00%)、10%苯磺隆WP 9.00 g/hm~2+5%(唑啉草酯+炔草酯)EC 30.00 g/hm~2处理(减施60.00%)、7%双氟·炔草酯OD 63.00 g/hm~2处理(减施25.00%)和28%唑草·苯磺隆WP 16.80 g/hm~2处理(减施33.33%)对麦田阔叶杂草的鲜质量防效分别为98.64%、98.99%、98.54%和98.68%,表明除草剂减量施用对麦田杂草仍具有较好的防效。施用除草剂后,小麦叶片叶绿素SPAD值呈现先下降再上升的趋势。药后3 d、5 d、7 d,28%唑草·苯磺隆WP 33.60 g/hm~2处理(增施33.33%)小麦叶片叶绿素SPAD值显著低于7%双氟·炔草酯OD 63.00 g/hm~2处理(减施25.00%)、10%苯磺隆WP 9.00 g/hm~2处理(减施60.00%)和空白对照(CK)的叶绿素SPAD值,低于其他处理的叶绿素SPAD值。     

黄土丘陵区坡面薄层水流动力学特性及其对土壤侵蚀的影响

为奠定基于运动力学参数构建土壤侵蚀模型的理论基础,通过不同降雨强度(25、50和75 mm/h)、不同坡长(1、5、10、15和20 m)下径流小区内人工模拟降雨试验,对不同处理下坡面薄层水动力学特性进行分析,并对水动力学参数与土壤侵蚀之间的关系进行初步探讨。结果表明:当坡度一定时,坡面平均流速主要受坡长及单宽流量影响,降雨强度通过影响单宽流量的大小间接影响坡面平均流速;在试验设计范围内,当坡长1 m时,整体上呈"层流-急流态",当坡长为1 m时,整体上呈"层流-缓流态";当降雨强度一定时,雷诺数随着坡长的增加线性增加,佛汝德数随着坡长的增加以幂函数形式增加;降雨强度对坡面流有明显的"增阻"效应;坡面阻力系数随着坡长的增加呈幂函数减小趋势;坡面平均土壤侵蚀率与单宽流量间呈一元线性趋势增加,与水流平均流速间呈指数函数增加,与雷诺数间呈二次函数增加。     

粉碎机异形筛片气流场数值模拟及试验研究

针对传统环筛式锤片饲料粉碎机存在气固环流层影响粉碎机性能的问题,采用理论分析、数值模拟、粉碎性能试验相结合的方法,对粉碎机安装异形筛片时粉碎室内物料颗粒受到的气力作用和内部流场运动规律进行研究。分析粉碎机使用异形筛片对粉碎性能的影响。优化后的异形筛片分别命名为B_1(小圆弧半径R_1=51mm)、B_2(R_1=83mm)、B_3(R_1=93mm),利用流体动力学软件对粉碎室安装3种异形筛片的气流场进行数值模拟,获得粉碎室气流场分布信息。在相同工况下,对装有3种异形筛片的CPS-420型粉碎机进行粉碎性能试验,分析不同筛片对物料粉碎效果的影响。模拟结果表明:粉碎机采用间隔分段圆弧筛片后,粉碎室环流区域产生不同强度的涡旋,能够改变物料环流运动规律,提高物料过筛能力;锤片组扫过区域的气流呈现出较为杂乱无序的分布状态,有利于形成湍流运动,从而增加物料颗粒受打击几率。粉碎性能试验结果表明:锤片饲料粉碎机安装B_3筛片的粉碎机生产效率,较B2、B1筛片分别提高8.1%、16.0%,吨料耗电量分别降低10.5%、15.0%,温升分别降低0.6和0.1℃。优化后的3种异形筛片,能够提高粉碎机的生产效率,降低电能的损耗、改善物料温升,对提高锤片饲料粉碎机性能具有积极意义。